To Next PageTo Next Page
Need help?Do you have a question about the Napoleon SDO800 and is the answer not in the manual?
General| Motor Type | DC |
|---|---|
| Remote Control | Yes |
| Security | Rolling code technology |
| Speed | 7.5 inches per second |
| Remote Control Included | Yes |
Minimizes start-up load on garage door opener and door.
Opener learns opening and closing force automatically.
Door reverses automatically if overloaded during closing.
Adjustable security resistance for sensitive and reliable operation.
Functionality for a wall-mounted switch.
Detects obstructions and reverses the door when closing.
Prevents operation at low voltage to protect components.
Uses rolling code for secure and non-repeatable transmissions.
Provides backup power in case of mains failure.
Allows for a key-based locking mechanism.
Door automatically closes after a set period.
Includes a caution light for operational status indication.
Describes the function of the Open/Stop/Close button.
Photo Eyes feature for door protection.
Automatic safety reversal during downward operation.
Detailed steps for installing the steel track, including bracket fixing and power connection.
Setting the travel limits and force for opening and closing.
Pairing a transmitter with the opener's receiver.
Adjusting the force for safety reverse mechanism.
Configuring the automatic door closing timer.
Configuring the photo beam safety sensor.
Using the "K" button to operate the motor unit directly.
Adds an Open/Stop/Close button for door control.
Provides safety consideration with reverse force and time according to standards.
List of components and quantities for aluminum track installation.
List of components and quantities for steel track installation.
