What to do if my Narcissus QN-M866-2 Accessories knife is not working?
If your Narcissus Accessories knife is not working, first check the power supply. If the issue persists, it might be a product problem; in that case, contact us for a free replacement.
Why can't I sharpen my Narcissus QN-M866-2 knife?
If you're having trouble sharpening your Narcissus Accessories knife, consider these points: * Ensure you're grinding obliquely, not vertically. * Make sure the slots are on your right and pull back instead of pushing forward. * Increase the grinding time and drag the knife slowly. * Note that this sharpener is not suitable for ceramic or curved knives.
What to do if my Narcissus QN-M866-2 knife is blocked while sharpening?
If your Narcissus Accessories knife gets blocked while sharpening, it might be due to the knife being curved. You should flatten the knife before sharpening it. If the issue persists, it could be due to wheel deviation, and you should contact us for a free replacement.
Why is the blade of my Narcissus Accessories knife asymmetric after sharpening?
An asymmetric blade on your Narcissus Accessories knife after sharpening is likely due to applying different intensity. Avoid squeezing the wheel hard.
How to prevent scratches on my Narcissus QN-M866-2 knife?
To prevent scratches on your Narcissus Accessories knife, ensure you clean any debris from the slots.
Why can’t I sharpen my Narcissus QN-M866-2 Accessories scissors?
If you're unable to sharpen your Narcissus Accessories scissors, it could be due to loose scissors’ rivet. Try tightening the rivet.
Ensure correct operation, pull backward only, avoid interruptions, and test safely.
Grind obliquely, use multiple passes, and pull smoothly for best edge.
Understand slot usage, unsuitable knives, voltage, and normal operational cues.
Prepare the sharpener and knives for sharpening common knives.
Detailed steps for sharpening knife blades using crude slots.
Steps to remove burrs from knife blades using fine slots.
Specific safety and usage notes for sharpening common knives.
Prepare the sharpener and serrated knives for sharpening.
Steps for sharpening the serrated side of knives.
Steps to remove burrs from serrated knife blades.
Specific safety and usage notes for serrated knives.
Identify the cutting side and check the rivet of scissors.
Prepare the sharpener and scissors for grinding.
Steps to grind scissors blades and remove burrs.
Specific safety and usage notes for grinding scissors.
General| Brand | Narcissus |
|---|---|
| Model | QN-M866-2 |
| Category | Accessories |
| Language | English |
To Next Page