•
Installing the drain hose
- The height of the drain hose location must be 80 - 100 cm. Lock the
drain hose against displacement by locking it into the clip on the back
of the washing machine.
- Secure the drain hose at the end with a fixing hook to prevent it f r o m
shifting and overflowing.
- It is not recommended to extend the drain hose. If this is unavoidable,
contact a qualified service organization. The hose extension should not
exceed 250 cm (longer extensions could lead to back suction).
Note: Do not immerse the drain hose in water, securely fasten it and check for leaks.
•
Connection to the power grid
Before connecting to the mains, check:
- Suitability of the socket in relation to the maximum power of the appliance (for safety reasons, the
circuit fuses should be set to a minimum of 13 A).
- The voltage must correspond to the voltage indicated on the type plate of the appliance.
- Compatibility of the appliance plug and socket.
APPLIANCE CONTROL PANEL E
A - Washing program selector
Turn the washing programme selector
c l o c k w i s e / c o u n t e r c l o c k w i s e to select the desired programme (see
the Programme Selection Guide for more information).
Please note: The washing programme selector is also the on/off knob, if you turn the selector out of position
"0", the appliance is switched on.
B - Start/pause button
To Next Page
Loading...