Need help?Do you have a question about the Narex EBP 65 and is the answer not in the manual?
Guidelines for safe operation including work area, electrical precautions, and user protection.
Instructions for proper power tool usage, maintenance, and professional repair services.
Detailed technical specifications for the belt sander models EBP 65 and EBP 65-E3.
Overview of controls, double insulation, intended use, and safety instructions.
Steps for initial setup, powering on, and operating the tool.
How to use permanent run mode and adjust belt speed for optimal performance.
Procedure for removing and mounting abrasive belts, including adjustment.
Techniques for grinding, replacing the driving belt, and using accessories.
Routine maintenance, proper storage, and environmental disposal guidelines.
Details on warranty, coverage, and measured noise/vibration emission levels.
Declaration that the product meets relevant safety and electromagnetic compatibility standards.
General| Power | 650 W |
|---|---|
| Chuck Size | 13 mm |
| Drilling diameter in wood | 30 mm |
| No-load speed | 0-2800 RPM |
| Impact rate | 0-44800 BPM |
To Next Page