Narvitech HD60 Pro User Manual

Quick Guide
© 2021 Narvitech Corp.
English 繁體中文
2
NS110
NS110
Package Contents
Parts and Ports
Quick Guide Cyberlink Key
Micro SD Card Slot
Record Button
Snapshot
1
1
3
2
2
3
HDMI In Port
Mode Switch (SD/PC)
Micro USB Power Input
4
5
6
LED indicator status
Ready to record
Recording (PC/SD mode)
long press recording button in SD card mode
when connected to PC
SD card not inserted (SD card mode)
Green
Green flashing
No VideoRed
Red flashing
SD card reader mode
Blue
Firmware UpdateWhite flashing
LED indicator status
Ready to record
Recording (PC/SD mode)
long press recording button in SD card mode
when connected to PC
SD card not inserted (SD card mode)
Green
Green flashing
No VideoRed
Red flashing
SD card reader mode
Blue
Firmware UpdateWhite flashing
43
HD60 Pro
USB 2.0 Micro to Type A HDMI Cable
HDMI
MicroUSB
F1 SD
Mode
PC
4
6
5
How to record the screen on camera?
First, setup a camera on a tripod, connect
HDMI cable to the camera.
*Different model camera has different HDMI port configuration,
please prepare the HMDI cable accordingly.
1
Connect NS110 to the camera via HDMI
cable, power up NS110 with a power
bank, then switch NS110 to SD card
mode and insert a SD card.
2
Secure NS110 and power bank on to the
tripod (Velcro tape is recommended),
press the record button to start recording !
(press again to stop recording)
3
*More information about SD card recording
can be found in the Narvitech official
website > Support
HDMI
MicroUSB
A
C
B
How to live streaming / record on PC/Laptop
First, connect NS110 to a camera
via HDMI cable.
*Different model camera has different HDMI port configuration,
please prepare the HMDI cable accordingly.
1
After set up , open software(Screen Recorder 4,
OBS ,etc) and start live streaming/recording
immediately!
3
Then, connect NS110 to a PC/Laptop
via USB cable, switch NS110 to PC
mode.
2
F1 SD
Mode
PC
F1 SD
Mode
PC
HDMI
MicroUSB
A B

Narvitech HD60 Pro Specifications

General

Video Input	HDMI
Maximum Capture Resolution	1080p60
Encoding	H.264
Interface	PCIe
Audio Input	HDMI
Supported Resolutions	1080p60, 1080p30, 720p60, 720p30
Power Supply	PCIe slot powered

Summary

How to Live Stream / Record on PC/Laptop

Connect NS110 to Camera via HDMI

Connect the NS110 device to a camera using an HDMI cable.

Connect NS110 to PC/Laptop and Switch to PC Mode

Connect the NS110 to a computer via USB and set the mode to PC.

Start Live Streaming/Recording

Launch streaming software and begin live streaming or recording.

How to Record the Screen on Camera

Setup Camera and Connect HDMI

Set up the camera on a tripod and connect the HDMI cable to the camera.

Connect NS110, Power Bank, and Set SD Card Mode

Connect NS110 to camera via HDMI, power it with a power bank, and set to SD card mode.

Secure NS110 and Start Recording

Secure NS110 and power bank to a tripod and press the record button to start recording.