Narwal FREO - Page 7

• Do not lea
ve appliance unaended when plugged in. Unplug it from the power outlet when not in use
and be
fore servicing.
• Use e
xtra care when cleaning on stairs.
• Do not use your robot without dust bag and/or filters in place.
• Prevent unintentional starting. Ensure the switch is in the o-position before connecting to
the baery pack, picking up or carrying the appliance. Please do not touch the power switch when
holding the robot or the base station. Please do not hold the robot or the base station while they
are charging.
• Disconnect the baery pack from the appliance before making any adjustments, changing
accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting
the appliance accidentally.
• To maintain product safety, service must only be performed by a qualified repair person using
identical replacement parts.
SAVE THESE INSTRUCTIONS
clean
clean
the
be gathered
• Do not leave appliance unaended when plugged in. Unplug it from the power outlet when not in use
and before servicing.
• Use extra care when cleaning on stairs.
• Do not use your robot without dust bag and/or filters in place.
•
Prevent unintentional starting. Ensure the switch is in the o-position before connecting to
the baery pack, picking up or carrying the appliance. Please do not t
ouch the power switch when
holding the robot or the base station. Please do not hold the robot or the base station while they
are char
ging.
•
Disconnect the baery pack from the appliance before making any adjustments, changing
a
ccessories, or storing the appliance. Such preventive safety measures reduce the risk of starting
the applianc
e accidentally.
•
To maintain product safety, service must only be performed by a qualified repair person using
identical replacement parts.
SAVE THESE INSTRUCTIONS
clean
clean
the
be gathered
cause
regulative
to be
,
the
scrap
the
cli edge
stepping
end
operating
lower
Do not use and store your robot in extremely hot or cold environments. Do not operate your
robot below 0°C/32°F or above 35°C/95°F. Do not store your robot below -20C/-4°F or above
70°C/158°F. Charge your robot at a temperature between 5°C/41°F and 30C/86°F. Keep your
robot away from fire or places with temperatures higher than 130°C/266°F. Otherwise, your
robot may explode.