NAS power 1000 User Manual

GARAGE DOOR OPENER
INSTALLATION MANUAL
 Please read the manual and the enclosed
safety materials carefully!
 Fasten the manual near the garage door after
installation.
 Periodic checks of the opener are required to
ensure safe operation.
 The model number label is located on the left
side panel of your opener.
MEN -002-B
GARAGE DOOR OPENER
INSTALLATION MANUAL
Please read the manual and the enclosed safety materials
carefully!
Fasten the manual near the garage door after installation.
Periodic checks of the opener are required to ensure safe
operation.
The model number label is located on the left side panel
of your opener.
MEN -002-B
GARAGE DOOR OPENER
INSTALLATION MANUAL
Please read the manual and the enclosed safety materials
carefully!
Fasten the manual near the garage door after installation.
Periodic checks of the opener are required to ensure safe
operation.
The model number label is located on the left side panel
of your opener.

NAS power 1000 Specifications

General

Brand	NAS
Model	power 1000
Category	Garage Door Opener
Language	English

Summary

Introduction

Safety Symbol and Signal Word Review

Explains safety symbols and signal words used throughout the manual.

Assemble the Rail

Garage Door Opener Assembly

Fasten the Rail to the Garage Door Opener

Determine the Header Bracket Location

Guidance on finding the correct position for the header bracket.

Install the Header Bracket

Steps for mounting the header bracket to the wall or ceiling.

Connect the Rail to the Header Bracket

Hang the Garage Door Opener

Attach the Emergency Release Rope and Handle

Connect the Door Arm to the Trolley

Install the Wall Control

Wire the Wall Control to the Opener

Install the Photo Eye Safety System

Install the Safety Reversing Sensors

Details on mounting and wiring the safety sensors for obstruction detection.

Power

Connect Power

Instructions and safety precautions for connecting the unit to electrical power.

Adjustments

Safety and Travel Adjustments

Covers warnings on safety reversal system and travel limit adjustments.

Programming and Adjustment

Program the Travel

Setting the open and close limits for the garage door.

Remote Control Programming

Adjust Reverse Force Sensitivity

Photoelectric Switch Function

Trouble shooting