Need help?Do you have a question about the Nash SIREN R3 and is the answer not in the manual?
General| Waterproof | Yes |
|---|---|
| Power Source | Battery |
| Volume Control | Yes |
| Tone Control | Yes |
| Sensitivity Adjustment | Yes |
| LED Indicator | Yes |
| Type | Bite Alarm |
| Water Resistance | IP67 |
Process for registering your R3 alarm or Receiver with Nash Tackle for warranty extension.
Covers inserting battery, power on/off, muting, volume, and sensitivity settings for the R3 Head.
Details on tone selection, Bobbin Glow function, and using Nash Bobbin Glow Pipes.
How the R3 Head indicates low battery and when to replace the battery.
Covers inserting battery and power on/off for the R3 Receiver.
Explains Receiver Tone, Volume, Recall Last Event, and Alert/Mute modes.
Details on enabling, disabling, and the function of the Anti-Theft alarm on the Receiver.
Step-by-step guide for pairing R3 heads to receiver channels 1-5.
Procedure to erase all programmed R3 head pairings from the receiver.
Covers operating frequency, temperature, and water protection guidelines.
Instructions for fitting Glow Pipes to R3 alarms and Bobbin Heads.
Steps for preparing and fitting drag weights to the Glow Pipes.
Lists product, standards, documentation, and signatory for conformity.
To Next Page
