Need help?Do you have a question about the Nash TRAX and is the answer not in the manual?
General| Category | Fishing Equipment |
|---|---|
| Type | Bite Alarm |
| Brand | Nash |
| Model | TRAX |
| Power Supply | Battery |
| Water Resistance | Yes |
| LED Indicators | Yes |
| Volume Control | Yes |
| Tone Control | Yes |
| Sensitivity Adjustment | Yes |
Connect the wheel assembly to the load carrying frame using brackets and thumbscrews.
Insert handles into the rear recesses of the load carrying frame and tighten thumbscrews.
Charge batteries separately in a well-ventilated room. Avoid contact with metal objects.
Connect charger clips to battery terminals, observe LED status, and repeat for second battery.
Connect charged batteries using the supplied red jump wire connector cable.
Lift feet, press button, and use throttle lever for forward movement at a comfortable pace.
Explains thermal cut-out, free-running wheel, and LED charge indicators.
Advice for optional rear wheel kit and ensuring clear path before operation.
Avoid full battery drain, keep controller dry, and store properly.
Details on 12/24 month warranty, serial number location, and proof of purchase.
To Next Page
