National Flooring Equipment 5700-aus User Manual

National Flooring Equipment 5700-aus

58 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Read Manual Before Operating Machine

ALL DAY BATTERY RIDE-ON SCRAPER

INSTRUCTION MANUAL

Rev B

401810

Table of Contents

Questions and Answers:

D
David FordAug 13, 2025
What to do if National Flooring Equipment 5700-aus Power Tool charger blows the branch circuit fuse/circuit breaker shortly after being switched on?
- J
  Jeffrey HernandezAug 13, 2025
  If the National Flooring Equipment Power Tool charger blows the branch circuit fuse or circuit breaker shortly after being switched on, it could be due to a branch circuit that is too small. Try relocating the charger to a branch circuit with a heavier rating or remove other loads from the circuit.
S
shelbyhodgesAug 16, 2025
What does it mean when National Flooring Equipment 5700-aus LED is solid red with a yellow flash?
- R
  Randy HallAug 17, 2025
  If the LED on your National Flooring Equipment Power Tool is solid red with a yellow flash when powered up, it indicates that the battery is very low. The charger is in a slow charge phase until the voltage rises to a safe level before fully turning on. Leave it connected; it may take hours, but if the voltage rises even a little, it should recover and turn the charger fully on. Avoid letting your batteries deeply discharge, as this is the primary cause of premature battery failure.
J
Jack AlvarezAug 20, 2025
Why National Flooring Equipment 5700-aus batteries don’t receive a full charge?
- L
  lovemichaelAug 20, 2025
  There are several reasons why the batteries of your National Flooring Equipment Power Tool might not be receiving a full charge: * The charger might be too small for the battery. Ensure the charger's output is approximately 10% of the battery's amp hour rating. * The charge profile might not be set correctly. Recheck the dip switch setting. * The cycle may require more time. Use only a 3 m (7’) properly gauged extension cord when charging. * The battery might be defective. If this is the case, consider replacing it.

National Flooring Equipment 5700-aus Specifications

General

Brand	National Flooring Equipment
Model	5700-aus
Category	Power Tool
Language	English

Summary

Features and Specifications

Features

Detailed description of the machine's components and functions.

Safety

General Rules for Safe Operation

Essential guidelines for safe machine operation and usage.

Hydraulic Safety Tips

Precautions and advice for safe operation of hydraulic systems.

Defensive Operator Characteristics

Qualities and mindset for a safe and effective operator.

Flammability, Hydraulic Fluid, and Safety Switches

Hazards associated with fluid, and safety switch functions.

Battery Precautions and First Aid

Safe handling of batteries and emergency first aid measures.

Battery/Charger Information

Charger Instructions

Step-by-step guidance on using the battery charger correctly.

Machine Charging and Low Voltage Interrupt

Procedures for charging the machine and its low voltage protection.

Machine Operation

Loading/Unloading Safety and Methods

Safe practices and techniques for loading and unloading the machine.

Transporting and Securing the Machine

Guidelines for safely moving and securing the machine during transit.

Operating Controls and Start-Up Procedure

Overview of controls and the sequence for starting the machine.

Hydraulic Levers and Cylinder Lift Operation

Dialing In and Adjusting the Machine

Adjusting the machine for optimal material removal and settings.

Blade Considerations and Cutting Head Insertion

Blade Insertion, Setting, and Application Set-Up

Procedures for blade installation, adjustment, and preparing for tasks.

Application Set-Up Examples

Machine Maintenance

Cutting Head and Slide Plate Removal

Adjusting Slide Plate and Cutting Head

Steps for adjusting the dual lift slide plate and cutting head height/angle.

Leak Maintenance and Oil Level Check

Pump, Valve, Cylinder, and Filter Replacement

Troubleshooting Guide

Machine Start-up and Operation Issues

Common problems, causes, and solutions for machine operation.

Parts List and Diagrams

Hydraulic Flow Diagram

Battery and Seat Wiring Diagrams

Machine Wiring Diagram

Comprehensive electrical diagram for the entire 5700 machine wiring.

Material Safety Data Sheet (MSDS) Information

Product Identification and Hazards

Health Hazards and Exposure Effects

Information on health risks, routes of entry, and exposure effects.

Emergency Procedures and Safe Handling

First aid, spill procedures, and safe handling/storage practices.

Product Information and First Aid

Accidental Release and Exposure Controls