To Next PageTo Next Page
Need help?Do you have a question about the National Geographic NGDRONE2G and is the answer not in the manual?
General| Brand | National Geographic |
|---|---|
| Model | NGDRONE2G |
| Category | Drones |
| Language | English |
Read the entire manual to become familiar with product features and operate correctly to avoid injury.
Learn responsible flying, check drone registration rules, and visit knowbeforeyoufly.org for current regulations.
Follow safety precautions like adult supervision and avoiding hazards when operating the drone.
Important guidelines for using LiPo batteries, including safety and handling.
Detailed instructions for safely charging the drone's battery using the provided cable.
Guidelines for storing, disposing of, and maintaining the drone battery to ensure longevity and safety.
Instructions for installing 4x 1.5V AA batteries in the remote control, ensuring correct polarity.
Securely attach the landing struts to the bottom of the quadcopter.
Snap blade protectors onto each corner of the drone for propeller protection.
Install four 1.5V AA batteries into the remote control, following the polarity diagram.
Connect the 3.7V 750mAh LiPo battery into the drone's compartment and secure the door.
Connect the drone's USB charging cable to a power source; charging takes 60-90 minutes.
Steps to safely switch off power, turn the drone over, and disconnect the battery.
Turn on the drone; flashing lights indicate it's ready to sync with the remote control.
Sync the drone by turning on the remote and manipulating the throttle lever until lights indicate readiness.
Use the TAKE OFF & LAND button for automatic take-off and landing; avoid catching the drone.
Rapidly flashing drone lights indicate low battery; land immediately to prevent automatic descent.
Hold the power button for approximately 1 second to turn off the remote control safely.
The drone maintains its current height automatically for stable flight.
Allows drone to orient relative to the pilot, simplifying directional control regardless of drone facing.
Adjust trim buttons to counter drone drift during flight for stable, controlled movement.
Perform aerial flips by pressing the FLIP button and moving the direction lever.
Press the RETURN TO HOME button for the drone to automatically return to its starting position.
Use SPEED +/- buttons to increase or decrease flight speed; SPEED 2 is the default for normal operation.
List of items included in the package: drone body, battery, remote, charging cable, etc.
Solutions for issues like unresponsive controls, blades not spinning, shaking, or battery charging problems.
Device compliance with FCC rules and potential interference conditions.
Equipment compliance with FCC radiation exposure limits for uncontrolled environments.
