What to do if no focus is possible with National Geographic NT114CF?
If you are unable to achieve focus, allow time for the telescope's temperature to equalize with the surrounding environment. This can affect the clarity and focus of the image.
What to do if viewing object is visible in the finder, but not through the National Geographic NT114CF?
If you can see an object in the finder scope but not through the main telescope, it means the finder scope needs alignment. Please align the finder to the telescope following the instructions.
Why is there a blurred picture in my National Geographic NT114CF Telescope?
If the image appears blurred, you may need to adjust the focus. Use the focus wheel to fine-tune the clarity until the image becomes sharp.
How to fix no picture on National Geographic Telescope?
If you are not getting any picture through the telescope, make sure to remove the dust protection cap from the telescope's objective lens.
Lists and identifies all components included in the telescope package.
Guide to properly aligning the red dot viewfinder for accurate targeting.
Instructions for cleaning telescope optics and eyepieces to maintain performance.
Method for navigating the night sky using constellations as guides.
Details on observable objects like the Moon and nebulae for astronomical viewing.
Formula and explanation for calculating telescope magnification.
General| Aperture | 114 mm |
|---|---|
| Type | Reflector |
| Finderscope | Red Dot Finder |
| Optical Design | Newtonian |
| Tripod | Aluminum |
| Eyepieces | 20 mm |
| Mount Type | EQ-1 Equatorial |
| Magnification | 50x |
To Next Page