National Instruments PXIe-5655 User Manual

Controller Type Description
MXI controller
Right-click PCI-to-PCI Bridge and select
Properties from the shortcut menu to
verify that the bridge is enabled.
7. Restart your computer.
Why Is the ACCESS LED O󽗿 When the Chassis Is On?
The LEDs may not light until the module has been configured in MAX. Before
proceeding, verify that the module appears in MAX.
If the module appears in MAX but the ACCESS LED fails to light aer you power on
the chassis, a problem may exist with the chassis power rails, the hardware module,
or the LED.
Notice Apply external signals only while the hardware is powered on.
Applying external signals while the hardware is powered o may cause
damage.
1. Disconnect any signals from the PXI Express module front panel.
2. Power o the PXI Express chassis.
3. Remove the module from the PXI Express chassis and inspect it for damage.
Do not reinstall a damaged device.
4. Install the module in a dierent PXI Express chassis slot from which you
removed it.
5. Power on the PXI Express chassis.
6. Restart your computer.
7. Verify that the module appears in MAX.
What Should I Do if the PXIe-5842 Fails the Self-
Test?
1. Restart the system.
ni.com
30
PXIe-5842 Getting Started

National Instruments PXIe-5655 Specifications

General

Brand	National Instruments
Model	PXIe-5655
Category	Transceiver
Language	English