USER GUIDE AND SPECIFICATIONS
NI WSN-3226
NI Wireless Sensor Network 4-Channel, 20-Bit Voltage/RTD Node
This user guide describes how to use the NI WSN-3226 voltage/RTD node and lists its specifications.
Figure 1 shows the NI WSN system components.
Figure 1. NI WSN System Components
The NI WSN-3226 is a four-channel, low-power, wireless voltage/resistance device that works with
other NI WSN-32xx nodes and gateways to form a wireless sensor network. The NI WSN system
consists of one or more NI WSN gateways, up to 36 NI WSN-32xx nodes per gateway, and multiple PCs
or Programmable Automation Controllers (PACs) to receive and analyze the distributed sensor data. For
more information about PACs, visit
ni.com.
When you connect the NI WSN gateway, you can use a separate host PC running Windows, or a PAC
running NI LabVIEW Real-Time, to display measurement results, status information, and to change the
NI WSN gateway and NI WSN-3226 device settings.
1 NI WSN-32xx Nodes
2 NI 9792 WSN Real-Time Gateway
3 NI WSN-9791 Ethernet Gateway
4 PC Running NI Software
4
2
1
1
3
Or
To Next Page
Need help?
General
