To Next PageTo Next Page
Need help?Do you have a question about the National 5200 PANTHER and is the answer not in the manual?
Guidelines for establishing safe work conditions around hydraulic equipment.
Discusses hydraulic pressure dangers and safe leak checking methods.
Information on hydraulic fluid flammability and correct fluid types.
Emphasizes operator duties, knowledge, and proper attire for safe operation.
Crucial inspections before operation, including guards and parts.
Guidelines on avoiding hazards like accidental starting, forcing equipment, and staying alert.
Characteristics of a good, safety-conscious operator.
Key instructions for safe machine operation and maintenance.
Specific safety protocols for changing and handling blades.
Identification of battery plugs, ports, and their functions.
Procedures for removing, replacing, and handling power packs safely.
Detailed steps for charging 24V and 48V battery systems.
Common questions about battery performance, charging, and maintenance.
Dimensions, weights, speed, and motor information for models.
Measurements for operator exposure to vibration and noise levels.
Operation of main power, hydraulic levers, and kill switch.
Procedures for raising/lowering cutting head and operating hood.
Steps for properly closing the machine's lid.
Advice on casters, foot pegs, disarming, and hood precautions.
Best practices for using battery chargers effectively.
Guidance on setting the cutting head angle for different tasks.
Techniques for loading onto docks, power gates, and ramps.
Methods for safely securing the machine using forks, winches, and chocks.
Understanding safe operating angles and tip-over risks.
Steps to make the machine more compact and easier to move.
Methods like taping wheels, leap-frogging boards, and palletizing.
Instructions for attaching and using the optional front wheel assembly.
How to move the machine manually without power.
Details on 18", 16", and 13" wheel sizes and their uses.
Purpose and placement of front and rear weights for traction.
Matching cutting head, blade, angle, and weight for material removal.
Safe adjustment of slide plate height and cutting head angle.
Guide to selecting and setting up blades for various floor materials.
Detailed list of available blades, their uses, and thickness.
Methods for sharpening different types of blades.
Form and contact information for ordering replacement blades.
Steps for maintaining slide plates, cutting heads, and leak checks.
Procedures for oil changes and wheel motor replacement.
Steps for replacing hoses, pumps, and valves.
Maintenance for hydraulic cylinders, battery packs, and wheels.
Instructions for changing filters and servicing casters.
Procedures for seat, fuse, switch, and debris deflector maintenance.
Diagrams and part numbers for exterior parts like hood, panels, and seat.
Diagrams for control levers, hoses, pumps, and valves.
Diagrams and part numbers for various blades and cutting heads.
Diagrams for electrical boxes, battery connectors, motors, and chargers.
Diagrams for filters, casters, and weights.
Visual guide to all safety and informational labels on the machine.
Information on available battery chargers and splitters.
Details on tile boxes, wheel assemblies, and cutting head extensions.
Key information on material hazards and immediate first aid measures.
Recommended engineering controls and personal protective equipment.
Compliance data and guidance for material disposal.
Terms and conditions of the manufacturer's warranty.
Guidelines and form for returning products for service or repair.
General| Brand | National |
|---|---|
| Model | 5200 PANTHER |
| Category | Power Tool |
| Language | English |
