B4D
English – 8
Calling up presets directly
The presets of the B4 are organized in 10 banks at 12 presets. The 12
presets of the current bank can be called up directly using the buttons
PRESET 1
to
6
and
7
to
12
respectively. The presets 7-12 are indicated by
the LEDs in the lower left corner at the buttons 1-6 and can be reached with
a second push on the button.
For selecting a preset bank the button
BANK
is pressed. The display of the
six
PRESET
buttons then changes: The currently selected bank is indicated
by a continuously flashing LED. After the first push on the button
BANK
the
upper LEDs within the
PRESET
buttons will blink. This indicates, that you
can now select from the first six banks by pushing the according button. If
you wish to select a bank between 7 and 10, push the button
BANK
a second
time. Now the lower LEDs within the
PRESET
buttons 7 to 10 are blinking.
A third push on the button
BANK
finishes the bank select mode.
After you have chosen a bank, the display changes again. Now the upper LED
on the button
PRESET 1
blinks to indicate that you still have to choose a
preset within the bank you just have chosen. The bank and preset change is
not excuted before then.
Calling up presets numerically
It is possible to choose presets according to numbers independently from
your bank structure by pushing and holding the button
PRESET 0-9
(second
function of the button
UPPER
labeled in blue) and additionally enter the
number of the desired preset via the numerical buttons
0-9
(second function
labeled in blue). The preset change is executed after releasing the
PRESET
0-9
button and a valid number has been entered.
Next/Previous preset
You can switch directly to the next/previous preset number using the buttons
-1
and
+1
. If the last preset (120) has been reached,
+1
switches to preset
number 1. During the bank selection the buttons
-1
and
+1
control the banks
accordingly.
To Next Page
Loading...