KORE 2 – 141
3.8.5 Distortion
This effect produces a wide variety of distortion sounds. The integrated
peak equalizer helps to emphasise the characteristic frequencies of the
processed, distorted sound.
Label Function Range Unit
Mix
Controls the balance between the dry, unprocessed signal (at the left) and the
wet, processed signal (at the right).
0..100 %
Drive This is the gain control for the input signal. Turn up to increase the overdrive. 0..60 dB
EQ Center The center frequency of the peak EQ. 25..12500 Hz
EQ Boost Controls the gain of the peak EQ. Use it to push the [Center Frequency]. 0..40 dB
Volume Output volume of the distorted signal.
To Next Page
Loading...
