EasyManua.ls Logo

Native Instruments Scarbee Mark 1 - User Manual

Native Instruments Scarbee Mark 1
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the Native Instruments Scarbee Mark 1 and is the answer not in the manual?

Native Instruments Scarbee Mark 1 Specifications

General IconGeneral
BrandNative Instruments
ModelScarbee Mark 1
CategorySoftware
LanguageEnglish

Summary

Introduction

Restoration

Details the extensive refurbishment process to restore the original instrument's condition and playability.

The Mark I Feel

Explains the importance of the instrument's feel for composition and its inspirational qualities.

The Instrument

Programs

Describes the two available programs: standard and stretched tuned versions.

Instrument Controls

Original Noise Adjustment

Control for adjusting the hum and hiss noise level of the instrument.

Effects

Introduces the included effects for enhancing the sound.

Tone Control

Simulates the original's passive tone control using EQ for a classic sound.

Reverb

Control for adjusting the room size and level of the reverb effect.

Delay

Control for adjusting the time, feedback, and level of the delay effect.

Pan

Control for modulation intensity and speed, including MIDI sync.

Auto-Wah

Control for the speed and tone of the auto-wah effect.

Compressor

Control for adjusting the threshold and output level of the compressor.

Chorus

Control for adjusting the depth and dry/wet balance of the chorus effect.

Distortion

Control for adjusting the amount of drive and output level of the distortion effect.

Phaser

Control for adjusting the depth and dry/wet balance of the phaser effect.

Amp

Control for adjusting the bass and treble frequencies of the amplifier.

Credits

Related product manuals