Scarbee Mark I - User Manual – 11
•
Feedback: Sends a portion of the output back into the input of the delay line, which cre-
ates repeating echoes. A value of 0 produces only one echo, higher values give multiple
echoes.
• Level: sets the level of the delay signal
2.2.6 Pan
•
Level: move the knob to set the modulation intensity. Higher values will pan further to
the sides.
• Speed: Determines the speed of the panning. This Parameter can be synchronized to an
external MIDI clock. Click on arrow to select time value from the menu.
2.2.7 Auto-Wah
•
Speed: Determines the speed of the modulation of the effect. This Parameter can be
synchronized to an external MIDI clock. Click on arrow to select time value from the menu.
• Tone: controls the initial frequency of the effect and decides the timbre of the sound.
To Next Page
Loading...
