Native Instruments Scarbee Mark 1 - Distortion; Phaser; Amp

Scarbee Mark I - User Manual – 13
2.2.10 Distortion
• Drive: Determines the amount of distortion applied to the sound. Higher values increase
the distortion effect.
• Output: sets the output of the module
2.2.11 Phaser
• Depth: sets the amount of LFO modulation applied to a signal. Higher amounts result in
a stronger phaser effect.
• Level: sets the dry/wet balance of the phaser
2.2.12 Amp
• Bass: boosts or cuts the level of the lower frequencies
• Treble: boosts or cuts the level of the higher frequencies