KORE 2 – 146
3.8.9 Ensemble
The enSeMBle effect subtly thickens the incoming signal. Similar to a chorus
effect, the delay time of two delay lines is constantly modulated.
Label Function Range Unit
Mix
Controls the balance between the dry, unprocessed signal (at the left) and the
wet, processed signal (at the right).
0..100 %
Rate Common Sets the frequency of delay time modulation. 0..8 Hz
Rate Offset
Controls the offset between two internal rate values, similarly to the [Depth
Offset].
0..100 %
Depth Common
Controls the depth of the Ensemble effect; technically, this is the amount of
delay time modulation.
0..100 %
Depth Offset
Controls the offset between two internal depth values; metaphorically, this
controls the depth of the depth control.
0..100 %
High Cut Sets the cutoff frequency of a low pass lter.
100..20000
Hz
To Next Page
Loading...
