KORE 2 โ 157
Label Function Range Unit
Spread Fine This sets the ๎ne difference in pitch shift between the left and right channels. -0.5..+0.5
semi -
tones
Spread Phase
Controls the phase offset between the grains used to create the pitch shifted
signals in the left and right channel.
-90..+90 deg
Grain Rate
This knob sets the length of the produced grains. Technically it is the rate of the
granular delay buffer readout.
Grain Reverse When this button is active, all grains are played back in reverse. On/off
Feedback
Sets the amount of feedback, i.e. how much of the output signal is fed back into
the input.
-100..100 %
To Next Page
Loading...
