KORE 2 – 184
Label Function Range Unit
Low / High Velocity
Control
Use these to specify the lower and upper margins of the MIDI velocity values
that the lter will let through. Click with the mouse and drag up or down to
change the values. For example: if you choose a low velocity Filter value of 32
and a high value of 96, all MIDI notes with a velocity below 32 and above 96
will be discarded, and all notes with a velocity beteen the two values will pass
through.
0…127
Event Filter
If these lter buttons are active (= white) the respective MIDI events are
blocked. Notes stands for MIDI note events CC for continuous controller (like
mod-wheel), CA stands for channel aftertouch, PA for polyphonic aftertouch, PB
is pitch bend and PC is program change data.
out
The MIDI Output Activity Meter ashes when MIDI data passes the output of the
plug-in.
To Next Page
Loading...
