KORE 2 – 193
The gate parameter controls the length of the produced MIDI notes. The
displayed unit is % of the note length dened by the rate parameter. It
ranges from 1% to 200%. 1% is very short, 100% leads to notes exactly
“lling” the grid length dened by rate. A gate value of 200% produces
overlapping notes of double the rate value.
Furthermore, you can introduce a Swing factor into the pattern. This
factor can be positive and negative, ranging from -100% to 100%. Swing
is sometimes also called shufe and skews the rhythmical relationship
between repeated note pairs and their length. With a positive Swing setting
the initial note of a pair is played longer while the second gets shorter.
With negative Swing it is the other way around.
Pitch and Velocity
The PitCH range species how many octaves the arpeggio will cycle. You
can set it to up to three octaves going up or down.
The Pattern menu controls the order of the note sequence:
To Next Page
Loading...
