KORE 2 – 205
For the rest of this chapter we will use the new nomenclature (F1 and
F2).
Please read the rest of this chapter carefully, as the new KORE Controller
functionality differs profoundly from the old implementation.
The basic modes
As a quick introduction we will provide an overview for the three basic
modes the KORE 2 Controller uses in KORE 2:
Control mode is entered via the Control button and is used for
navigating and using the Control Page system.
S
ound
mode KORE 2 Controller: is activated by the S
ound
button. It
is used for switching through the C
Hannel
i
nSertS
and provides control
over the Sound VariationS.
The F2 button takes you to B
rowSer
mode allowing you to navigate your
SearCH reSultS liSt and load KoreSounds.
Each of those modes contains two Pages, where you can toggle between
those two sub-modes by hitting the respective button again.
The other buttons are context-sensitive and change their functions
depending on the main mode your KORE 2 Controller is in.
►
►
►
To Next Page
Loading...
