Native Instruments O Kore 2 - Page 208

KORE 2 – 208
The enter button navigates into the selected KoreSound.
The eSCaPe buttons brings you back up one level.
Please note that the light-state of the u P /d own /l eFt /r igHt depends on the
situation. If you can’t navigate further left, the l eFt button won’t light up,
if you can move down you will see the d own button light up. This helps to
keep track of where you are on the channel roster.
Multiple KORE 2 plug-in instances
While you are in Sound mode the F1 button has a special function that
only applies when you have multiple instances of the KORE 2 plug-in
running in a host environment. It will take you to a screen showing all
running instances:
While holding the F1 button you can use the uP/down/leFt/rigHt buttons
to switch through the respective instances currently running. Every running
instance is displayed by a lled slot on the display. You also get the number
of the focused KORE 2 instance displayed between the slots.
►
►