KORE 2 – 217
Hitting Enter loads the currently selected KoreSound into the C
Hannel
inSert you have focused.
You can also use the Pre-liSten functionality of KORE 2 by activating the
Pre-liSten button on the Controller. With an active Pre-liSten button, any
KoreSound you select on your Controller (or in the KORE 2 B
rowSer
on
your computer screen) will immediately be loaded into the currently focused
CHannel inSert. You can step through the list one by one while playing on
your MIDI keyboard to try the different hits on your SearCH reSultS liSt.
There are two ways to leave the Pre-liSten mode with your KORE 2
Controller:
►Hit the eSCaPe button or the Pre-liSten button to cancel the Pre-liSten
mode, returning the focused CHannel inSert to the state it was in before
the activation of the Pre-liSten mode.
►Hit enter on the Controller to exit the Pre-Listen mode and keep the
loaded KoreSound in the CHannel inSert.
The Options
By hitting F2 twice you can access the oPtionS of your KORE 2
Controller.
These are mirrored in the oPtionS of the KORE 2 application. Please read
chapter 3.3.5 for a detailed description.
%
The Pre-Listen Mode runs
a lot smoother if you sort
your Search Results List by compo
-
nents. This is because Kore can
keep the audio engine in memory
when switching sounds as opposed
to loading a new engine for every
switched sound.
To Next Page
Loading...
