KORE 2 – 47
When using KORE 2 as a plug-in, multiple instances of KORE 2 can be
active simultaneously – one for each channel of the host application,
for example. You can identiy each instance of KORE 2 by its individual
number shown in the gloBal Header.
3.3.3 Global Header
The top-most strip of controls is called the gloBal Header. It is used
for switching around KORE 2’s interface to t the situation at hand and
provides access to some global functions that are independent of the
respective KoreSounds in the Performance.
It holds the following controls:
The Kore 2 l
ogo
(and the NATIVE INSTRUMENTS logo to the far
right), when clicked, opens the a
Bout
S
Creen
. This displays the version
number and installation type of your KORE 2 installation. Here you also
nd the names of all the people involved in the creation of KORE 2.
The gloBal Controller switch toggles the display of KORE 2’s gloBal
Controller on the uPPer Pane on and off. The keyboard shortcut for
this command is F1.
The edit area switch displays the Sound Matrix on the uPPer Pane. This
can only be visible alternatively to the Sound Manager. Use F2 on your
computer keyboard as a shortcut.
►
►
►
%
To assign the KORE 2
Controller to any instance,
click into the area beside the in-
stance number. Refer to chapter
3.9.1 for information on how to
change the hardware focus with the
KORE 2 Controller itself.
%
To assign the KORE 2
Controller to any instance,
click into the area beside the in-
stance number. Refer to chapter
3.9.1 for information on how to
change the hardware focus with the
KORE 2 Controller itself.
To Next Page
Loading...
