KORE 2 – 67
With MultiSounds, single-clicks recall the last display state of the
MultiSound: closed or opened. A MutliSound is opened with a double-
click.
You can always close the component you recently opened by using the
CloSe button on the SideBar:
3.4.2 Channel types and signal routing
Signals – be they audio or MIDI – ow in the Matrix from top to bottom
elements, from the higher Sound Matrix level to the lower and from the
higher to the lower channel Insert. Via the aux sends, audio signals can
also ow horizontally within one Sound Matrix level.
Channel Types
KORE 2 Channels are exible things. Although there is such a thing as
channel types, any channel can at any time change its type by denition of
a different inPut SourCe for the channel. This is done via the inPut SourCe
menu on the audio taB (see next section).
There are three different channel types available:
SourCe CHannelS hold sounds without signal inputs (none on the Source
menu).
►
►
To Next Page
Loading...
