Native Instruments O Kore 2 - Page 75

KORE 2 – 75
Every channel can be switched to receive audio signals via the a ux
sends by choosing grouP BuS as its inPut SourCe.
Use the auxiliary deStination menu to select a group destination. In
front of the Group bus entries, you can view the channel numbers of
the available grouP CHannelS.
If there is no other channel on the respective Sound Matrix level or
there is none that has the bus as its input, the only routing option is
the outPut to the next higher level of the Sound Matrix.
If there is any other channel on that level with the Group Bus dened
as its Input you can choose it from the menu and the new routing is
established.
Choosing Remove from the menu deletes the output assignment. All
other Sends sitting to the right are moved one step to the left.
The MIDI Tab
The MIDI Tab of a Sound Matrix Level.
The Midi taB focuses on receiving and routing MIDI signals owing through
KORE 2’s Sound Matrix. Every channel has its own Midi taB and the Tab
of the channel currently in focus is displayed. The audio and Midi taBS are
displayed alternatively. Click on the word “Midi” to display the controls
of the MIDI Tab.
►
►
►
►
►