Native Instruments O Kore 2 - 3.5.5 Sound Variations and morphing

KORE 2 – 94
FS 1 or FS 2 for controlling the respective Controller button via one
of the two Footswitches that may be connected to your KORE 2
Controller.
Of course you can also use external MIDI data to move the Controllers on
a P age , be it a u Ser P age , a C Hannel P age or a P lug - in P age . Just select the
desired Controller on the Page and specify a MIDI controller number (0 to
127) in the Midi CC aSSignMent eld.
The respective MIDI data will be received corresponding to the settings on
the Midi t aB of the channel. Please see the chapter about the e dit a rea
(chapter 3.4) for more on MIDI ports and channels.
3.5.5 Sound Variations and morphing
The last section on the gloBal Controller of KORE 2 is dedicated to
the Sound VariationS. Every KoreSound can store up to eight different
settings of its Control PageS. These can be recalled directly or you can
morph between the settings of the knobs (not the buttons) creating
seamless sound transitions.
Dene some Controllers on your uSer, CHannel or Plug-in PageS and click
the S ound V ariation S aVe Button. It starts to blink in yellow and you can
choose one of the eight Variations on the V ariation g rid . Click it and the
Variation is saved. The letter representing the different Variation changes
its color from white to black, denoting that it holds a Control Page state.
►
%
Please note that you can
exclude Pages from be-
ing saved in a Sound Variation by
using the Recall column on the
Page List of the Sound Manager
(see below).