Native Instruments SOLID MIX Series User Manual

See ↑1.1.2, Other Compression Parameters and Features for more general information on
the attack and release time.
(9) COMPRESSION meter: Allows you to visually monitor the current amount of applied com-
pression in real-time.
(10) Output knob and (11) Dry knob: Allow you to mix the original signal (Dry knob) and the
compressed signal (Output knob). This is called parallel compression (see ↑1.1.2, Other Com-
pression Parameters and Features for more info on this). When the Dry knob is set fully coun-
ter-clockwise, only the compressed signal is output. Turning the Dry knob clockwise progres-
sively blends in the original signal into the compressor output.
After changing the Dry level, you might have to adjust the Output knob accordingly to en-
sure that the overall output remains at the optimum level!
Using the SOLID BUS COMP
The Main Interface
Solid Bus Comp - Manual - 13

Native Instruments SOLID MIX Series Specifications

General

Brand	Native Instruments
Model	SOLID MIX Series
Category	Music Mixer
Language	English