MUTE
During a call, press volume control ‘+’ and ‘–’ buttons together to mute the microphone. Press
again to unmute.
CLEAR PAIRED DEVICE LIST
To clear the list of all paired devices, you will need to perform Factory Reset. To do so, switch off the
MM03 place it on the charging base, then press and hold MFB button for 5 seconds while in
charging state until you hear an alert tone.
CHOOSE YOUR MM03 RINGTONE
You can dene how you want your MM03 to ring on incoming calls. You have a choice of 15
ringtones.
a) To enter the ringtone selection mode on you MM03, press and hold the volume control ‘+’ and
‘-’ buttons together for 2 seconds. Your MM03 will then play the current ringtone.
b) To go through the ringtone list, press the volume control ‘+’ button to play the next ringtone and
press the volume control ‘-’ button to play the previous ringtone.
c) To select the current playing ringtone and leave the ringtone selection mode, press and hold the
volume control ‘+’ and ‘-’ buttons together for 2 seconds.
d) The ringtone volume can be adjusted anytime while the MM03 is in standby. Press the volume
control ‘+’ button to increase the volume or ‘-’ button to decrease it.
INFORMATION: Please note that the MM03 also enables a Bluetooth
®
connection with any laptop
or desktop (Mac or PC) featured with a Bluetooth
®
Wireless Technology (supporting HS or HF prole)
to work with Skype, Google Talk or other VOIP services.
To connect your MM03 with your computer, you need to go through the pairing process (please
refer to the instruction manual of your computer). Please also see “PAIRING THE MM03 HANDSET
WITH YOUR iPHONE”
12
To Next Page
Loading...
Need help?
General