Nature Power Solar Generator 1800 User Manual (English)

Questions and Answers:

B
Bryan WilliamsJul 28, 2025
How to fix a Nature Power Inverter when the solar charger indicator is not ON?
- J
  Jamie WeeksJul 29, 2025
  If the solar charger indicator isn't on when the solar panel is connected to your Nature Power Inverter, it could be due to two reasons. The solar panel might not be generating enough power to initiate the solar charger and charge the battery; in this case, check the location and direction of the solar panel to ensure it's receiving adequate sunlight. Another possibility is an incorrect wire connection at the solar panel junction box; verify this connection to ensure it's properly configured.
A
Amber MarksAug 8, 2025
What to do if my Nature Power Inverter has no output?
- A
  Austin PatelAug 8, 2025
  If your Nature Power Inverter unit isn't providing any output, first, ensure the unit is turned on. If it is on, the unit may have shut down because of utility issues, low battery voltage, or incorrect settings. Check these factors, referring to the Unit Operation section for guidance.
M
Marcus MitchellAug 17, 2025
Why does my Nature Power Solar Generator 1800 have insufficient run-time?
- D
  Daniel AndrewsAug 18, 2025
  There are a couple of reasons why your Nature Power Inverter might not run for as long as expected. It could be that the battery isn't fully charged. To resolve this, charge the battery by plugging the unit into the utility for more than 24 hours or by leaving the solar panel plugged into the battery pod for over 72 hours. Alternatively, the battery might be nearing the end of its life, in which case you should replace the battery or battery pod.