Naturela NPBC-V6T-2 - User Manual

Electronic pellet burner controller - NPBC-V6T-2
ELECTRONIC CONTROLLER
FOR PELLET STOVE WITH WATER JACKET
NPBC-V6T-2
SOFTWARE VERSION 58/29
User Manual / ver. 1.2 http://www.naturela-bg.com/en/ page 1 of 41

Summary

WAY OF OPERATION

EXPLOTATION INSTRUCTION

Turn On;Off the burner

Instructions for switching the burner on, off, or to timer mode.

Changing the set temperature for heating the water in the boiler

Statistics of pellet consumption by hours

Information about the Wi-Fi modem and the Internet connection

Diagnostic

Parameter settings

Service settings

General Settings - Here are the control settings of the internal auger motors

Flame detection

Power Modulation

Safety Setup

Fuel dependent settings

Power P1, Power P2, Power P3, Suspend

Sets parameters for different burner power levels and suspend mode.

SETUP PARAMETERS RANGE FOR NPBC-V6 T-2

Naturela NPBC-V6T-2 Specifications