Naturela NPBC-V6T-2 User Manual

Electronic pellet burner controller - NPBC-V6T-2
The controller uses another method of intermediate cleaning, in which the fire is not
extinguished, but only increases the power of the fan or activates the FC output to activate some
cleaning mechanism. The necessary settings for this cleaning method are set from the menu
"Service settings" »"Burning Setup "» "Fuel X" »" Intermediate cleaning ". The parameters
which must be set are: the time during which the intermediate cleaning procedure is repeated, the
fan speed to be maintained during cleaning, how long to clean and whether to use the FC output
for another mechanism for cleaning. During this cleaning the pellet delivery do not stop.
User Manual / ver. 1.2 http://www.naturela-bg.com/en/ page 10 of 41

Naturela NPBC-V6T-2 Specifications

General

Brand	Naturela
Model	NPBC-V6T-2
Category	Controller
Language	English