Name: Naturela NPBC-V6T-2
Brand: Naturela
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Electronic pellet burner controller - NPBC-V6T-2

Mechanisms and sensors controlled by NPBC-V6T-1

• Electric feed screw motor to transfer the fuel from the bunker to the burner (power up to

180 W)

• Electric internal auger motor to forward the fuel into the burning chamber (power up to

180W)

• Main blower with smooth speed control to regulate the air flow (power up to 180W)

• Additional cleaning fan (power up to 900W)

• Linear cleaning actuator with one or two control outputs (up to 180W).The second output

is an option (AUX)!

• Exhaust gases fan with smooth speed control (power up to 180W)

• Heating element to fire the pellets (power up to 900W)

• Hot water Beamer circulation pump (power up to 180W)

• Central heating installation circulation pump (power up to 180W)

• (Optional) Analogue output (0..10V) for frequency inverter to power up a powerful air fan

• Photo sensor to detect the burning fire

• Temperature sensor or thermostat to control the back burning

• Temperature sensor to control the temperature of the water in the boiler

• Temperature sensor for the hot water heater

• High temperature sensor pt100 for detecting the fire and control the temperature of the

exhaust gases.

• A potential free contact of a room thermostat for better control of the burner and

circulation pump of the heating installation according to the room temperature.

• Connector for additional control module with room thermostat function NRC-8-SV

• USB interface for connection with a computer for software uprade

User Manual / ver. 1.2 http://www.naturela-bg.com/en/ page 5 of 41

Questions and Answers:

Need help?

Do you have a question about the Naturela NPBC-V6T-2 and is the answer not in the manual?

Naturela NPBC-V6T-2 Specifications

General