3. The color of the LED Indicator;
① The LED flashes red when in setup mode and the PIR is activated, or when ready for operation.
The LED goes off when the camera in armed.
② When battery is too low, the indicator light turns blue.
③ When left in standby / setup mode for a long period, the indicator flashes purple.
④ During a firmware update, the indicator light flashes green.
4. Only use Alkaline or Lithium batteries.
5. When inserting the SD card into the camera, make sure that the SD card lock switch is not in the
Lock position.
6. When using an external power supply, make sure that voltage is 12V.
4
Notes Before Use
To Next Page
Loading...