To Next PageTo Next Page
Need help?Do you have a question about the Navigator BIT BOSS PB1230G and is the answer not in the manual?
Details the electrical specifications for the appliance, including voltage, frequency, and wattage.
Emphasizes using two people for safety and lists the tools required for assembly.
Guide to assemble the grease tray support structure using specific parts.
Steps to attach the grease tray assembly to the main grill barrel with hardware.
Instructions for attaching the lid stopper onto the top of the main barrel.
Details on attaching support plates and caster wheels to the unit's base.
Instructions for securing the remaining support plates and wheels to the cart.
Steps to assemble the main frame structure by attaching front and back panels.
Process for lifting and mounting the main grill barrel onto the assembled cart.
How to attach the cart panel to the main grill assembly using screws.
Instructions for attaching the cart bars to each support leg for stability.
Steps to attach the wire retainer for the LP gas cylinder to the right legs.
How to install the support bracket for the gas cylinder to the cart bottom shelf.
Instructions for attaching the hose retainer to the side burner panel.
Guide to attaching the lid handle and bezel to the grill lid using screws.
Steps for attaching the brackets that support the front shelf to the grill barrel.
Instructions for placing the front shelf onto its support brackets or bottom plates.
Guide to attaching the side shelf to the main barrel using pre-loosened screws.
Steps for installing flame broiler parts, heat tents, and cooking grids.
How to slide in the grease tray and place the grease bucket with liner.
Steps to install the AA battery into the igniter slot on the control panel.
Information on connecting the appliance to electrical power sources, including outlet types.
General
