NAX 400C - Technical Data; Circular Combustion Saw

EN 35
TECHNICAL DATA
CIRCULAR COMBUSTION SAW
Type, model
NAX 400C
Engine
TT-1E46F series BS
Fuel mix
40: 1 (4 l of gasoline for every 100 ml of two-stroke oil)
Fuel tank capacity
500 cm
3
Mix oil (recommended)
Briggs & Stratton for two-stroke engines
Oil for lubricating the chain
NAX
Oil tank capacity for chain lubrication
250 cm
3
Engine capacity
51.5 cc
Machine rated power
1.8 kW – 8500 rpm
Maximum torque
2.4 Nm - 6500 rpm
Spark plug
TORCH L8RTF
Maximum engine speed with cutting attachment
11000 rpm
Maximum engine idle speed
3000 ± 300 rpm
Gearwheel
7T X 0.325’’
Chain scale
0.325’’
Chain thickness
1.5 mm
Number of chain links
72 pieces
Guide length
18’’ (45 cm)
Maximum chain feed speed
~ 20,8 m/s
Sound pressure level
LpA= 101.4 dB(A) K =3 dB
The value of vibrations transmitted by the machine and acting
on the operator's upper limbs
front handle a front_hv, eq 6.188 m/s
2
rear handle a rear_hv, eq 7.215 m/s
2
K= 1.5 m/s
2
Guaranteed sound power level LWA
117 dB(A)
Equipment mass
6.6 kg
Year of manufacture
2022
THE DEVICE INCLUDES:
 petrol chain saw (power supply unit, guide bar guard, guide bar, chain, butt),
 screws, nuts, necessary wrenches,
 operation manual, EC declaration of conformity, warranty conditions, warranty card.