EasyManua.ls Logo

Naxa ND-861 - User Manual

Naxa ND-861
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
R
HDMI DVD PLAYER
INSTRUCTION MANUAL
MODEL:ND-861
PLEASE READ CAREFULLY BEFORE OPERATING

Questions and Answers

  • S
    smithloriAug 15, 2025
    Why is my Naxa DVD Player remote control not working?
    • R
      Rhonda WeaverAug 15, 2025
      If the remote control for your Naxa DVD player isn't working, several factors could be the cause. First, the batteries might be weak or dead, so try replacing them with new ones. Ensure the batteries are installed correctly, matching the polarity markings inside the battery compartment. Also, make sure you're aiming the remote directly at the sensor, and that there are no obstacles blocking the path of the beam. The distance to the player matters too; stay within 5 meters (16 feet) for optimal performance.
  • T
    Trevor CruzAug 18, 2025
    What to do if my Naxa DVD Player has no picture and/or no sound?
    • E
      Emma ChenAug 18, 2025
      If your Naxa DVD player isn't producing any picture or sound, start by checking the connection cables to ensure they are correctly installed. If the cables are fine, the video output settings on the player might be incorrect; try pressing the VIDEO button repeatedly until the correct picture displays on your TV. Also, make sure that the connected TV is turned on and that the power strip is on, if one is being used.
  • S
    Samantha JenningsAug 21, 2025
    How to fix Naxa DVD Player when power is on, but unit is not functioning properly?
    • M
      Marc PerezAug 22, 2025
      If your Naxa DVD player has power but isn't working correctly, condensation may have formed inside the unit. Unplug it and wait about 1-2 hours for it to dry out. It could also be due to the disc. Try using other discs to see if the issue persists. Also, the disc might be dirty or inserted incorrectly; clean the disc and re-insert it with the label side up.
  • G
    Gregory HernandezAug 25, 2025
    What to do if my Naxa DVD Player does not start playback?
    • L
      Lisa KingAug 25, 2025
      If your Naxa DVD player isn't starting playback, the rating level might be set to block the TV; try removing the lock with the password. Ensure the DVD is inserted correctly, not upside down. Also, try another CD/DVD disc to rule out a non-playback disc. Make sure the disc is placed correctly in the guide of the disc tray. Finally, the disc might be dirty or damaged; clean it as best you can and try again.
  • J
    Jessica JohnsonAug 28, 2025
    How to fix rolling playback picture on Naxa DVD Player?
    • J
      Jenna DavisAug 28, 2025
      If the playback picture on your Naxa DVD player is rolling, the color system settings might be wrong. Press the P/N button on the remote control repeatedly until the correct picture displays on the TV.
  • S
    Stephanie HarrellSep 1, 2025
    How to improve poor picture quality on Naxa DVD Player?
    • J
      Juan LittleSep 1, 2025
      If you're experiencing poor picture quality with your Naxa DVD player, the disc might be dirty or damaged. Clean the disc as best you can and try again.
  • R
    Ruben McintoshSep 3, 2025
    Why can't I change the angle on my Naxa DVD Player?
    • M
      Mark HartmanSep 4, 2025
      If you can't change the angle on your Naxa DVD player, it may be because angles are not recorded on the disc or are only recorded on a certain section. Try another disc. The multi-angle may not be available on the whole disc. Wait until the multi-angle icon appears on the screen then press the ANGLE button on the remote control to change the angle on screen.
  • S
    samuelalexanderSep 7, 2025
    Why is there no power on my Naxa DVD Player?
    • C
      Catherine MoralesSep 7, 2025
      The AC cord may be unplugged. Plug the AC cord into an AC outlet.
  • J
    Jordan GreenSep 12, 2025
    Why some functions do not work on my Naxa DVD Player?
    • D
      David JohnsonSep 12, 2025
      Some features and functions are not available on all discs. The function may not be available on the disc. Try another disc.

Summary

Important Safety Instructions

Electrical Shock and Laser Hazard Warnings

Precautions against electric shock and hazardous laser radiation exposure.

Environmental and Accessory Warnings

Warnings regarding exposure to rain/moisture and using only recommended accessories.

Cord Safety and Sharp Points

Safety notes on long cords, adult supervision, and unit sharp points.

General Operation and Cleaning Rules

Basic safety and cleaning instructions for product operation.

Overloading and Object Entry Hazards

Warnings against overloading electrical outlets and inserting objects into product openings.

Damage Requiring Service

Conditions indicating damage that necessitate professional servicing.

Cleaning and Moisture Condensation

Instructions for cleaning the unit and preventing damage from moisture condensation.

Product Overview

Operating the Remote Control

Connections

Operating System

DVD Playback Basics

Instructions for inserting discs, playback, search, and skip functions.

Playback Control Features

Details on OSD, Zoom, Angle, Mute, Video Output, Step, Slow, N/P, Repeat, Wide, and Goto functions.

Programming

System Setup

Language Settings

How to configure OSD, Menu, Audio, and Subtitle languages.

Display and Video Output Settings

Configuration for TV Standard, Display Type, Video Output, and HDMI Resolution.

Audio Output Settings

Settings for Digital Out, Analog Out, and Downmix options for audio.

Troubleshooting Guide

Common Problems and Solutions

A guide to diagnose and resolve common issues with the DVD player.

Naxa ND-861 Specifications

General IconGeneral
TypePortable DVD Player
Video OutputComposite Video
Audio OutputStereo
Supported FormatsDVD, CD, MP3, JPEG
Remote ControlYes
Progressive ScanNo
Video Output TypeComposite
Audio Output TypeStereo
Power SupplyAC Adapter, Rechargeable Battery
Playable Media FormatDVD, CD

Related product manuals