Proprietary of Nayax, All Right reserved
www.nayax.com | Level 1, Suite 3, 2 Help Street, Chatswood, NSW, 2067 | 02 8459 7207 | au-
info@nayax.com.au
Operating and Testing
1. Turn-on the Machine:
a) Make sure products are available in the machine before the vend test
b) Make sure prices are set up before the vend test
c) Ensure that all machine settings have been configured correctly for Card operation,
specifically Crane and Necta machines.
d) Make sure the door switch does not interfere with the working of the machine
2. Once the machine is powered up, a system Self-Test is automatically initiated, performing
the following checks:
a) SIM card
b) GPRS communication
c) Server connectivity
3. When the LCD displays “Swipe Card/Dial” – test the device with a card
a) Sound and communication checks are performed
4. Test the device via the following transactions:
a) Cash Purchase
b) Credit Card Purchase
c) Card Vend Cancel – check that credit is not retained on transaction cancel
Once all tests are successfully completed the VPOS Touch is fully installed and ready to be used.
To Next Page
Loading...
Need help?
General
