98
NBB Controls +
Components
GmbH
Transmitter Nano-L SMJ 7,2 V
> Channel number
During operation the set channel can be displayed by pressing the “Frequency switching” key.
> Battery life warnings
The quick blinking of the letter “L” in the display shows the end of the battery capacity. From this time
the operation of the transmitter is approx. 30 minutes possible. During this time, bring the unit into a
safe position, switch off the transmitter and replace the batteries with charged batteries.
> Energy saving function
If no buttons are pressed within a specified time*, the transmitter switches off automatically. The display
turns off. A transmitter can also be manufactured without a standby function for continuous operation
as an option.
*The standby time can be set as desired.
Please refer to the technical documents for the exact position of the “On/Horn”
and “Frequency switching” buttons.
To Next Page
Loading...
Need help?
General
