EasyManua.ls Logo

NCE NCE25LBLK - Service and Troubleshooting; Radio Interference Mitigation

NCE NCE25LBLK
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BEFORE YOU CALL FOR SERVICE
1. If the oven will not perform at all, the display does not appear or the display
disappears:
a) Check to ensure that the oven is plugged in securely. If it is not, remove the plug
from the outlet, wait 10 seconds and plug it in again securely.
b) Check the premises for a blown circuit fuse or a tripped main circuit breaker. If
these seem to be operating properly, test the outlet with another appliance.
2. If the microwave power does not function:
a) Check to see whether the timer is set.
b) Check to make sure that the door is securely closed to engage the safety
interlocks. Otherwise, the microwave energy will not flow into the oven.
IF NONE OF THE ABOVE RECTIFIES THE SITUATION, THEN CONTACT THE
AUTHORIZED SERVICE AGENT.
Note:
The appliance is for household use for heating food and beverages using
electromagnetic energy and for indoor use only.
RADIO INTERFERENCE
Microwave oven may cause interference to your radio, TV, or similar equipment. When
interference occurs, it may be eliminated or reduced by the following procedures.
a. Clean the door and sealing surface of the oven.
b. Place the radio, TV, etc. as far away from your microwave oven as possible.
c. Use a properly installed antenna for your radio, TV, etc. to get a strong signal
reception.
17