To Next PageTo Next Page
Need help?Do you have a question about the NCP 1000 Series and is the answer not in the manual?
Details the naming convention for the NCP condensing units.
Covers DANGER, WARNING, CAUTION definitions and general handling.
Initial steps and checks before beginning installation.
Covers low voltage wiring, connections, and maximum wire lengths.
Covers high voltage wiring, connections, and power supply requirements.
Guidelines for unit placement and required clearances for airflow and service.
Best practices for running, insulating, and isolating refrigerant lines.
Detailed steps for brazing refrigerant lines using nitrogen.
Methods for detecting leaks in the refrigerant system using nitrogen or refrigerant.
Steps for evacuating the system to remove air and moisture to 300 microns.
Procedures for initial unit startup and understanding the operational sequence.
Instructions for charging the system using a charging chart based on pressure and temperature.
Table showing refrigerant amounts for various line lengths and tubing sizes.
Charts detailing airflow for cased coil and air handler matched systems.
Recommended annual and periodic maintenance activities for the unit.
Checklist for verifying proper installation completion and system operation.
Information on unit noise levels and the optional insulated sound cover.
Critical steps and data collection required before removing a compressor for warranty.
Technical data and physical dimensions for 1000 and 3000 series units.
Technical data and physical dimensions for 4000 and 5000 series units.
Performance data for cased coil and air handler matched systems.
Details the product warranty coverage, exclusions, and limitations.
Step-by-step instructions for filing a warranty claim and required documentation.
General