NCR 7702 - Keypad Software and Utilities; Keypad Driver Installation; Keypad;Keyboard Remap Utility; SLEPOS 11 SP2;SP3 Patching

10 X-Series Integrated Keypad
Keypad Driver
The NCRUSBUtilities package for the Keypad module is located in the following
location:
http://www5.ncr.com/support/support_drivers_
patches.asp?Class=External/Terminals\7702XR7\Windows\F149Module\display
Refer to the Readme document for the driver installation instructions.
Keypad/Keyboard Remap Utility
The NCR POSKeyboard Remap Utility provides a graphical user interface for keyboard
remapping for 5932 Keyboards, and 5953, 5954, and X-Series Dynakeys. The utility is
located in the following location:
http://www5.ncr.com/support/support_drivers_
patches.asp?Class=External/NCRKeyboard\Remap\display
Refer to the Readme document for the utility installation procedure.
Prerequisite
Patch for SLEPOS 11 SP2/SP3
Before installing the NCRPOSKeyboardRemap utility on a SLEPOS 11 SP2/SP3 platform,
ensure the following are installed:
• Retail Platform Software for Linux(RPSL)
• RPSCOMM 463 Patch
Installing the RPSCOMM 463 Patch
1. Untar the RPSCOMM_463_Patch.tar in command line as tar xvf RPSCOMM_
463_Patch.tar
2. Run the script as sh RPSCOMM_463_Patch.sh
Installing the NCRPOSKeyboardRemap
1. Run the app run script as sh NCRPOSKeyboardRemap.sh