16
I463 selection of external handwheel axis
=1, selector in position 4
I464 selection of external handwheel axis
=1, selector in position 5
I465 selection of external handwheel axis
=1, selector in position 6
I470 selection of external handwheel axis
=1, selector in position 0.001
I471 selection of external handwheel axis
=1, selector in position 0.01
I472 selection of external handwheel axis
=1, selector in position 0.1
I600 position loop is closed for the spindle
=1 position loop is closed on the spindle, spindle is oriented
=0 position loop is not closed on the spindle
I610 INPOS AXIS 1.
=1, axis 1 is in position (FOL.ERR.1 <= INPOS1)
=0, axis 1 is off-position (FOL.ERR.1 > INPOS1)
I611 INPOS AXIS 2.
=1, axis 1 is in position (FOL.ERR.2 <= INPOS2)
=0, axis 1 is off-position (FOL.ERR.2 > INPOS2)
I612 INPOS AXIS 3.
=1, axis 3 is in position (FOL.ERR.3 <= INPOS3)
=0, axis 3 is off-position (FOL.ERR.3 > INPOS3)
I613 INPOS AXIS 4.
=1, axis 4 is in position (FOL.ERR.4 <= INPOS4)
=0, axis 4 is off-position (FOL.ERR.4 > INPOS4)
I614 INPOS AXIS 5.
=1, axis 5 is in position (FOL.ERR.5 <= INPOS5)
=0, axis 5 is off-position (FOL.ERR.5 > INPOS5)
I615 INPOS AXIS 6.
=1, axis 6 is in position (FOL.ERR.6 <= INPOS6)
=0, axis 6 is off-position (FOL.ERR.6 > INPOS6)
To Next Page
Loading...