Thank you for purchasing the Performance Double Doors Cabinet.
6 Hole
L-Bracket
3 Pcs
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
Insert the Cam Lock into Klix
Cam. Turn Klix Cam to lock.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
G
F
E
CB
D
A
Keep all hardware parts out of reach of children.Keep all hardware parts out of reach of children.
KLIX CAM INSTRUCTIONSKLIX CAM INSTRUCTIONS
Check that you have all parts and hardware.
Do not tighten any screws or bolts until the unit is completely assembled.
Check that you have all parts and hardware.
Do not tighten any screws or bolts until the unit is completely assembled.
being scratched.
IMPORTANT !!
being scratched.
IMPORTANT !!
Line up Cam Lock,
turn clockwise.
Line up Cam Lock,
turn clockwise.
11
Bottom PanelTop Panel Adjustable Shelf
Insert the cam with the arrow
pointing towards the hole in the
edge.
Insert the cam with the arrow
pointing towards the hole in the
edge.
22
Back Panel Front Rail Side Panel x 2
33
Door x 2
Please follow these instructions for easy assembly.
10
Housing Cap (Long)
8 Pcs
15
Please follow these instructions for easy assembly.
Cam Lock
8 Pcs
Klix Cam
8 Pcs
833 L-Bracket
1 Pc
8
11
Iron Shelf Support
4 Pcs
14
Screw
#3.5 x 12mm
2 Pcs
9
2
3
JCBC Screw
M6 x 40mm = 4pcs
1
4
Washer = 8pcs
Screw
#3.5 x 20mm
4 Pcs
Screw
#3.5 x 16mm
1 Pc
16
4
11
5
M4 x 65
Allen-Key
1 Pc
17
Drawer Lock
1 Pc
12
6
13
7
H
Hanging Panel x 2
Door Stopper
1 Pc
Double Door Cabinet
PL 113GG-A1
Adjustable
Glide
4 Pcs
Screw
#6 x 5/8"
18 Pcs
Metal Scallop
Shape Handle
2 Sets
0' Compo
Door Hingers
2 Pairs
PAGE 1 OF 4
To Next Page
Need help?
General