FEATURES
PrioritySwitch selects for you the best available power
source (grid 230Vac, or inverter) in a fully automated way,
saving your service battery from overload power requests.
the PrioritySwitch is designed to power the various utilities
that need 230VAC voltage, the grid will always have maximum
priority. When it’s disconnected from the system, the SP230
automatically switches power from the inverter (and thus from
the batteries) on the 230Vac output. The devices and utilities that
can NOT or need NOT to be powered when the power source in
use is the service battery (eg. battery charger, refrigerator,
etc.) also have dedicated connection.
LED explanation
•
Green LED "inverter" active: voltage on the "inverter"
connector.
•
Green LED "output" active: voltage on the "output"
connector.
•
Green LED "main 230v" active: voltage on main 230V in
connector and main 230V out.
To Next Page
Loading...