EasyManua.ls Logo

NE kids 4090 - User Manual

Default Icon
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ST
AIRCASE LOFT BED
Assembly Instructions Page 1 of 22
NE kids 2300 Prospect Dr
. Christiansburg, VA 24073
www
.ne-kids.com
NE
ki
ds
Item No. 4090, 5090, 6090, 7090
1. Follow the information on the warnings appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent
entrapment or falls.
3. Surface of mattress must be at least 5 inches (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on the upper bunk.
6. Periodically
, check and ensure that the guardrail, stairs, and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the stairs for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a nightlight may provide added safety precaution for a child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk. If bunk bed will be placed next to the
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and wall.
12.
13.
Keep these instructions for future reference.
!
!
STRANGULA
TION HAZARD
Never attach or hang items to any part of the bunk bed that are not designed for use with the bed;
including, but not limited to, hooks, belts and jump ropes
SIZE OF MA
TTRESS AND FOUNDATION
SAFETY
WARNINGS
SAFETY
FIRST!
All of NE kid’s Bunkbeds were
designed and manufactured with
your child’s safety as our top
priority.
Their unparalleled strength is a
bi-product of the safety design.
Our bunks meet all compliance
with ASTM F 1427-07 “Standard
for Bunk Beds” and Code of
Federal Regulations (CFR) 1213
“Safety Standards for Entrapment
Hazards in Bunk Beds” and
(CFR) 1513 “Requirements for
Bunk Beds”.
Safety is a cooperative eort
between us as the manufacturer,
and you as a guardian. Please
read and consider the
warnings listed on this page
when choosing a mattress and
discussing rules of use with your
child.
REPLACEMENT P
ARTS
Replacement parts, including
additional guardrails, may be
obtained from any of NE kids’
dealers.
Use only mattress, foundation and deck combined which is 74-75 inches long and 37 ½-38 ½ inches
wide on twin upper bunk or 53-54 inches wide on full upper bunk. Ensure thickness of mattress and
foundation combined does not exceed 8 inches and the mattress is at least 5 inches below upper edge
of guardrails
Question and Answer IconNeed help?

Do you have a question about the NE kids 4090 and is the answer not in the manual?

Summary

SAFETY WARNINGS

STRANGULATION HAZARD

Warning about attaching items to the bed structure to prevent injury.

SIZE OF MATTRESS AND FOUNDATION

Specifies required mattress and foundation dimensions for safety.

PARTS LIST

RIGHT-HAND STAIRCASE ASSEMBLY

Steps 1-2: Toy Box & Support

Assembling the toy box and support, and attaching the inner panel.

Steps 3-4: Panel Attachment

Attaching outer and back support panels for staircase.

Step 5: Final Positioning

Lifting the assembled staircase into position.

LEFT-HAND STAIRCASE ASSEMBLY

Steps 1 A-2 A: Toy Box & Support

Assembling toy box, support, and attaching inner panel for left-hand.

Steps 3 A-4 A: Panel Attachment

Attaching outer and back support panels for left-hand staircase.

Step 5 A: Final Positioning

Lifting the left-hand staircase into position.

DESK HUTCH ASSEMBLY

OUTSIDE-FACING DESK ASSEMBLY

INSIDE-FACING DESK ASSEMBLY

UPPER BED ASSEMBLY

NE kids 4090 Specifications

General IconGeneral
BrandNE kids
Model4090
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals